Leitz Reference Flexibility
High-precision measurements of tight tolerance parts with maximum application adaptability.
Smart sensor automation to boost the efficiency of your measurement cycles
Leitz Reference Flexibility builds upon the capabilities of the Precision configuration to boost the machine’s adaptability to more challenging measurement tasks and decrease cycle time.
The CMM has an articulating probe head that measures at any angle to add accessibility to complex 3D part geometries. In addition, the SENMATION sensor automation system increases measurement flexibility by seamlessly integrating a variety of tactile and optical sensors within one measurement routine to address multi-part or multi-feature applications.
01
Multisensor
Multisensor capabilities with a broad range of tactile and optical sensors on indexing or fixed probe heads.
02
Versatility
Customizable user interfaces and modules with QUINDOS metrology software for industry-specific parts and special geometries.
03
SENMATION
SENMATION enabling automatic sensor changes within part programs and providing a futureproof platform interface for flexible integration of new sensors.
04
Rotary table
Simultaneous 4-axis scanning – optical or tactile – in combination with a rotary table.
Leitz Reference Flexibility Specifications
Available Size (X, Y, Z)₁
05.04.03 / 07.07.05 / 10.07.06 / 12.09.07 /
15.09.07 / 20.09.07 / 15.12.09 / 22.12.09 /
30.12.09 / 40.12.09
Accuracy₂
From 1.1μm + L/350, MPE(E0/E150)₃) [18-24 °C]
From 0.7μm + L/400, MPE(E0)₃) [19-21 °C]
From 0.7μm + L/400, MPE(E150)₃) [19-21 °C]
From 1.2μm + L/250, MPE(E0/E150)₄) [15-30 °C]
Probe type compatibility
Touch-trigger probe
Scanning probe
Non-contact probe (optical sensor)
Contact probe (roughness sensor)
Laser scanner probe
Automation ready
YES
Temperature specification
18-24 °C (standard configuration)
19-21 °C (Accuracy ++ model )
15-30 °C (XT, option)
₁ Sizes are expressed in dm. I.e., 07.07.05 means X = 700 mm; Y = 700 mm; Z = 500 mm
₂ According to ISO 10360-2 (2009)
₃ MPE(E0/E150) specifications are to be formally understood as MPE(E0E150)* for the case where non-normal CTE material calibrated test lengths are used. Length unit measure (L) in mm
₄ XT option only
You may be interested in...
© 2024 Hexagon AB and/or its subsidiaries